aboutsummaryrefslogtreecommitdiffhomepage
path: root/helper
AgeCommit message (Collapse)Author
2026-03-17all: remove deprecated packagesOphestra
Closes #24. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-11-12internal/helper: relocate from helperOphestra
This package is ugly and is pending removal only kept alive by xdg-dbus-proxy. Its exported symbols are made available until v0.4.0 where it will be removed for #24. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-10-14helper/args: variadic check functionOphestra
This package turns out to be much less widely used than anticipated, and might be facing removal. This change makes test cases cleaner. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-10-13treewide: parallel testsOphestra
Most tests already had no global state, however parallel was never enabled. This change enables it for all applicable tests. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-10-13helper/stub: write ready byte lateOphestra
Hopefully eliminates spurious failures. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-10-09message: relocate from containerOphestra
This package is quite useful. This change allows it to be imported without importing container. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-10-07container/fhs: move pathname constantsOphestra
This allows referencing FHS pathnames without importing container. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-10-07container/check: move absolute pathnameOphestra
This allows use of absolute pathname values without importing container. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-09-29helper/proc: raise FulfillmentTimeout in testsOphestra
This appears to be yet another source of spurious test failures. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-09-29container: remove global msgOphestra
This frees all container instances of side effects. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-09-13container: initialise cmd earlyOphestra
This allows use of more cmd methods. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-08-11container: use absolute for pathnameOphestra
This is simultaneously more efficient and less error-prone. This change caused minor API changes in multiple other packages. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-08-09container: remove PATH lookup behaviourOphestra
This is way higher level than the container package and does not even work unless every path is mounted in the exact same location. This behaviour causes nothing but confusion and problems, Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-08-03container/ops: merge mqueue and dev OpsOphestra
There is no reason to mount mqueue anywhere else, and these Ops usually follow each other. This change merges them. This helps decrease IPC overhead and also enables mounting dev readonly. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-07-27container: improve doc commentsOphestra
Putting them on the builder methods is more useful. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-07-25container: remove custom cmd initialisationOphestra
This part of the interface is very unintuitive and only used for testing, even in testing it is inelegant and can be done better. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-07-18container: use more reliable nonexistenceOphestra
Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-07-03treewide: migrate to hakurei.appOphestra
Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-07-03container: move out of toplevelOphestra
This allows slightly easier use of the vanity url. This also provides some disambiguation between low level containers and hakurei app containers. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-07-02hakurei: move container toplevelOphestra
Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-07-02cmd/hakurei: move to cmdOphestra
Having it at the project root never made sense since the "ego" name was deprecated. This change finally addresses it. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-06-25treewide: rename to hakureiOphestra
Fortify makes little sense for a container tool. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-06-05nix: update flake lockOphestra
Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-27helper/args: copy args on wt creationOphestra
Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-27helper/stub: output to stdoutOphestra
Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-25helper: remove bubblewrap wrapperOphestra
Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-17sandbox: pass cmd to cancel functionOphestra
This is not usually in scope otherwise. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-17sandbox: move out of internalOphestra
Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-17sandbox: move params setup functionsOphestra
Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-17sandbox: wrap fmsg interfaceOphestra
Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-17seccomp: install output atomicallyOphestra
Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-17dbus: run in native sandboxOphestra
Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-16helper: implement native container backendOphestra
Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-16helper: raise WaitDelay during testsOphestra
Helper runs very slowly with race detector. This prevents it from timing out. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-16ldd: lib paths resolve functionOphestra
This is what always happens right after a ldd call, so implement it here. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-16helper/stub: copy args to stderrOphestra
Some helpers are implemented via go test itself in tests, and as a result stdout gets clobbered. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-16helper: eliminate commandContext replacementOphestra
This is done more cleanly by modifying Args in cmdF. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-15helper: expose extra files to directOphestra
Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-15helper: combine helper ipc setupOphestra
The two-step args call is no longer necessary since stat is passed on initialisation. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-15helper: rearrange initialisation argsOphestra
This improves consistency across two different helper implementations. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-15helper: move process wrapper to directOphestra
Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-15helper: clean up interfaceOphestra
The helper interface was messy due to odd context acquisition order. That has changed, so this cleans it up. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-14helper/proc: pass extra files and startOphestra
For integration with native container tooling. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-14seccomp: move out of helperOphestra
Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-14helper: embed context on creationOphestra
Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-12helper/seccomp: improve error handlingOphestra
This passes both errno and libseccomp return value. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-12helper/seccomp: seccomp_load on negative fdOphestra
Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-03-09helper/proc: expose setup fileOphestra
Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-02-25dbus: set process group idOphestra
This stops signals sent by the TTY driver from propagating to the xdg-dbus-proxy process. Signed-off-by: Ophestra <cat@gensokyo.uk>
2025-02-23fortify: keep external files aliveOphestra
This should eliminate sporadic failures, like the known double close in "seccomp". Signed-off-by: Ophestra <cat@gensokyo.uk>