| Age | Commit message (Collapse) | Author |
|---|
|
This one is quite simple and has no state. Needs to emulate pam_systemd behaviour so that will change.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
There's quite a bit of code duplication here, but since this is already quite simple it is best to leave it as is for now.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
The loadFile behaviour does not guarantee the buffer to be zeroed or not clobbered if an error is returned, but for the current implementation it is good to check.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
The trailing zero bytes need to be sliced off, so send cookie size alongside buffer content.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
Still needs to check the relocated functions separately.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This also improves readability of test cases.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
These are better tested separately instead of creating many op test cases.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This will be merged with spFilesystemOp eventually.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
The shim is an implementation detail and should not be mentioned in the API.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
These are now considered stable, defined behaviour and can be used by external programs to determine shim outcome.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
When using two channels it is possible for the other case to be reached before all pending winfo are consumed, causing incorrect reporting.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
No idea what systemd is doing with this to cause its options to change.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
Doc comments are also reworded for clarity.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
The memory saving is relatively insignificant, however this increases serialisation efficiency.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
The booleans are getting packed into a single field. This requires non-insignificant amount of code for JSON serialisation to stay compatible.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This is not done very cleanly, however this op is pending removal for the in-process dbus proxy so not worth spending too much effort here. As long as it checks all paths it is good enough.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This package turns out to be much less widely used than anticipated, and might be facing removal. This change makes test cases cleaner.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This enables external testing of system.I state.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This should eliminate intermittent failures in the forward test.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This was only useful when wrapping bwrap.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
Most tests already had no global state, however parallel was never enabled. This change enables it for all applicable tests.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
Hopefully eliminates spurious failures.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This is no longer used.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This is no longer useful and is highly error-prone.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This corrects minor mistakes in doc comments and adds them for undocumented constants.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This covers every statement. Some of them are unreachable unless the kernel returns garbage.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This prevents state from os tainting the test data.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
The session bus still performs non-standard formatting since it makes no sense for hakurei to start the session bus.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This provides disambiguation from fhs.AbsTmp.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This does not add anything meaningful to the template, since there are already prior examples showing src-only bind ops. Remove this since it causes confusion by covering the previous mount point targeting /nix/store.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
The current value is copied from a test case, and does not resemble its intended use case.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This change also significantly reduces duplicate information in test case.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This begins the effort of fully covering internal/app.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
The original code clobbers hst.Config, and was not changed when being ported over.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This fixes line information in test reporting messages.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This is useful for testing.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This is useful for testing.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This makes no sense to be part of the global state.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This behaviour might be useful, so do not lock it out. This change also fixes an oversight where the unchecked value is used to determine ForwardCancel.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This is less error-prone than passing the address to the entire hst.Config struct, and reduces the likelihood of accidentally clobbering hst.Config. This also improves ease of testing.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This is cleaner and less error-prone, and should also result in negligibly less memory allocation.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This can be removed eventually as it is barely used.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
These errors are printed with a descriptive message prefixed to them, so it is more readable to expose the underlying errno.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This package is quite useful. This change allows it to be imported without importing container.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
Finalise no longer clobbers hst.Config.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This significantly decreases ipc overhead.
Closes #3.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This simulates params to shim and this is the last step before params to shim is merged.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This allows reuse and finer grained testing of fromConfig.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This allows reuse of the populateEarly method in test instrumentation.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
|
This will end up merged with another op after reordering. For now relocate it into its dedicated op for test instrumentation.
Signed-off-by: Ophestra <cat@gensokyo.uk>
|
