CLI install guide

- -

This is a guide on installing GrapheneOS on the - officially supported devices. It can be followed - for both the official releases and custom - builds. The web installer is an - easier approach to installing the official releases via a browser with WebUSB - support.

- -

We strongly recommend following these official instructions. The official guide has - a lot of collaborative effort put into covering all of the edge cases and is regularly - tested by many people on each supported OS. Following these instructions to the letter - without skipping, reordering or adding any steps will give you a proper GrapheneOS - installation unless there's a hardware issue. We strongly recommend against following - unofficial guides deviating in any way from the official instructions.

- -

If you have trouble with the installation process, ask for help on the - official GrapheneOS chat channel. There are almost - always people around willing to help with it. Before asking for help, make an attempt - to follow the guide on your own and then ask for help with anything you get stuck - on.

- - - -

Prerequisites

- -

You need a computer for running the CLI install process with at least 2GB of free - memory available and 32GB of free storage space. The web installer can be run on an - Android phone or tablet, unlike the command-line installation.

- -

You need a USB cable for attaching the device to the computer performing the - installation. Whenever possible, use the high quality standards compliant USB-C - cable packaged with the device. If your computer doesn't have any USB-C ports, - you'll need a high quality USB-C to USB-A cable. You should avoid using a USB hub - such as the front panel on a desktop computer case. Connect directly to a rear port - on a desktop or the ports on a laptop. Many widely distributed USB cables and hubs - are broken and are the most common source of issues for installing GrapheneOS.

- -

Installing from an OS in a virtual machine is not recommended. USB passthrough - is often not reliable. To rule out these problems, install from an OS running on - bare metal. Virtual machines are also often configured to have overly limited - memory and storage space.

- -

Officially supported operating systems for the CLI install method:

- -

Windows 10
Windows 11
macOS Ventura (13)
macOS Sonoma (14)
macOS Sequoia (15)
Arch Linux
Debian 11 (bullseye)
Debian 12 (bookworm)
Ubuntu 20.04 LTS
Ubuntu 22.04 LTS
Ubuntu 24.04 LTS
Ubuntu 24.10
Linux Mint 20 (follow Ubuntu 20.04 LTS instructions)
Linux Mint 21 (follow Ubuntu 22.04 LTS instructions)
Linux Mint 22 (follow Ubuntu 24.04 LTS instructions)
Linux Mint Debian Edition 6 (follow Debian 12 instructions)

- -

Make sure your operating system is up-to-date before proceeding.

- -

The web installer is more portable and can be used - from Android, ChromeOS and GrapheneOS itself since it can run anywhere with a - browser with working WebUSB support.

- -

You need one of the officially supported - devices. To make sure that the device can be unlocked to install GrapheneOS, - avoid carrier variants of the devices. Carrier variants of Pixels use the same stock - OS and firmware with a non-zero carrier id flashed onto the persist partition in the - factory. The carrier id activates carrier-specific configuration in the stock OS - including disabling carrier and bootloader unlocking. The carrier may be able to - remotely disable this, but their support staff may not be aware and they probably - won't do it. Get a carrier agnostic device to avoid the risk and potential hassle. - If you CAN figure out a way to unlock a carrier device, it isn't a problem as - GrapheneOS can just ignore the carrier id and the hardware is the same.

- -

It's best practice to update the device before installing GrapheneOS to have - the latest firmware for connecting the device to the computer and performing the - early flashing process. Either way, GrapheneOS flashes the latest firmware early - in the installation process.

- -

Enabling OEM unlocking

- -

OEM unlocking needs to be enabled from within the operating system.

- -

Enable the developer options menu by going to Settings > About phone/tablet and repeatedly - pressing the Build number menu entry until developer mode is enabled.

- -

Next, go to Settings > - System > Developer options and - toggle on the OEM unlocking setting. On device model variants (SKUs) which - support being sold as locked devices by carriers, enabling OEM unlocking - requires internet access so that the stock OS can check if the device was sold as - locked by a carrier.

- -

For the Pixel 6a, OEM unlocking won't work with the version of the stock OS - from the factory. You need to update it to the June 2022 release or later via an - over-the-air update. After you've updated it you'll also need to factory reset - the device to fix OEM unlocking.

- -

Opening terminal

- -

These instructions use command-line tools. Launch the terminal as you would any - other application. On Windows, launch a regular non-administrator instance of the - PowerShell terminal. Do not use the legacy Command Prompt or administrator variant - of PowerShell.

- -

Use the same terminal for the whole installation process. If you close it, - you'll lose the setup of the environment for the installation.

- -

On Windows, run the following command to remove PowerShell's legacy curl alias - for the current shell to avoid needing to reference it as curl.exe - instead of curl:

- -

Remove-Item Alias:Curl

- -

Obtaining fastboot

- -

You need an updated copy of the fastboot tool and the - directory containing it needs to be included in the PATH - environment variable. You can run fastboot --version to determine - the current version. It must be at least 35.0.1. You can use a - distribution package for this, but most of them mistakenly package development - snapshots of fastboot, clobber the standard version scheme for platform-tools - (adb, fastboot, etc.) with their own scheme and don't keep it up-to-date - despite that being crucial.

- -

On Arch Linux, install android-tools and skip the section below on - using the standalone release of platform-tools from Android:

- -

sudo pacman -S android-tools

- -

Debian and Ubuntu do not have a usable package for fastboot. Their packages for - these tools are both broken and many years out-of-date. Follow the instructions - below for platforms without a proper package.

- -

Standalone platform-tools

- - - -

If your operating system doesn't include a usable version of fastboot, - you can use the official standalone releases of platform-tools. This is - our recommendation for most users. The flashing process won't work unless - you follow these instructions including setting up PATH.

- -

To download, verify and extract the standalone platform-tools on Debian and - Ubuntu:

- -

sudo apt install libarchive-tools
-curl -O https://dl.google.com/android/repository/platform-tools_r35.0.2-linux.zip
-echo 'acfdcccb123a8718c46c46c059b2f621140194e5ec1ac9d81715be3d6ab6cd0a  platform-tools_r35.0.2-linux.zip' | sha256sum -c
-bsdtar xvf platform-tools_r35.0.2-linux.zip

- -

To download, verify and extract the standalone platform-tools on macOS:

- -

curl -O https://dl.google.com/android/repository/platform-tools_r35.0.2-darwin.zip
-echo 'SHA256 (platform-tools_r35.0.2-darwin.zip) = 1820078db90bf21628d257ff052528af1c61bb48f754b3555648f5652fa35d78' | shasum -c
-tar xvf platform-tools_r35.0.2-darwin.zip

- -

To download, verify and extract the standalone platform-tools on Windows:

- -

curl -O https://dl.google.com/android/repository/platform-tools_r35.0.2-win.zip
-(Get-FileHash platform-tools_r35.0.2-win.zip).hash -eq "2975a3eac0b19182748d64195375ad056986561d994fffbdc64332a516300bb9"
-tar xvf platform-tools_r35.0.2-win.zip

- -

Next, add the tools to your PATH in the current shell so they can be - used without referencing them by file path, enabling usage by the flashing script.

- -

On Debian, Ubuntu and macOS:

- -

export PATH="$PWD/platform-tools:$PATH"

- -

On Windows:

- -

$env:Path = "$pwd\platform-tools;$env:Path"

- -

This only changes PATH for the current shell and will need - to be done again if you open a new terminal.

- -

Checking fastboot version

- -

Check the output of fastboot --version before continuing.

- -

Example of the output after following the instructions above for the - standalone platform-tools:

- -

fastboot version 35.0.2-12147458
-Installed as /home/username/platform-tools/fastboot

- -

Flashing as non-root

- -

On traditional Linux distributions, USB devices cannot be used as non-root - without udev rules for each type of device. This is not an issue for other - platforms.

- -

On Arch Linux:

- -

sudo pacman -S android-udev

- -

On Debian and Ubuntu:

- -

sudo apt install android-sdk-platform-tools-common

- -

The udev rules on Debian and Ubuntu are very out-of-date but the package has - the rules needed for Pixel devices since the same USB IDs have been used for many - years.

- -

Working around fwupd bugs on Linux distributions

- -

The fwupd software often used on Linux distributions for updating firmware is - known to incorrectly connect to arbitrary devices using the fastboot protocol which - will block using them for the intended purpose. This can result in receiving an - error about the USB device already being in use (claimed) when trying to connect to - it for the intended purpose.

- -

You can stop fwupd with the following command:

- -

sudo systemctl stop fwupd.service

- -

This doesn't disable the service and it will start again on reboot.

- -

Booting into the bootloader interface

- -

You need to boot your device into the bootloader interface. To do this, you need - to hold the volume down button while the device boots.

- -

The easiest approach is to reboot the device and begin holding the volume down - button until it boots up into the bootloader interface.

- -

Alternatively, turn off the device, then boot it up while holding the volume - down button during the boot process. You can either boot it with the power button - or by plugging it in as required in the next section.

- -

This step is not complete until your device displays a red warning triangle - and the words "Fastboot Mode". You must not press the device's power button - to activate the "Start" menu item, because the device must remain paused in - Fastboot mode for the fastboot command to connect to it.

- -

Connecting the device

- -

Connect the device to the computer. On Linux, you'll need to do this again if - you didn't have the udev rules set up when you connected it.

- -

Current Windows 10 and Windows 11 include a generic driver usable for fastboot - and no longer require installing a driver for installation on the Pixel 4a (5G) or - later. It isn't enough for legacy 4th generation Pixels due to the driver not - handling fastbootd, so you still need the driver for those. Outdated Windows - versions will still need the driver for non-obsolete devices too. You can obtain the - driver from Windows Update which will detect it as an optional update when the - device is booted into the bootloader interface and connected to the computer. Open - Windows Update, run a check for updates and then open the "View optional updates" - interface. Install the driver for the Android bootloader interface as an optional - update, which will show up as "LeMobile Android Device" due to USB ID overlap. An - alternative approach to obtaining the Windows fastboot driver is to obtain the latest driver for - Pixels from Google and then manually - install it with the Windows Device Manager.

- -

For the Pixel Tablet, disconnect it from the stand before continuing. The stand - uses USB to provide charging and audio output, but the tablet lacks support for - using both the stand and USB port at the same time.

- -

Unlocking the bootloader

- -

Unlock the bootloader to allow flashing the OS and firmware:

- -

fastboot flashing unlock

- -

The command needs to be confirmed on the device and will wipe all data. Use one - of the volume buttons to switch the selection to accepting it and the power button - to confirm.

- -

Obtaining openssh

- -

OpenSSH is used to verify the download of the OS beyond the security offered by - HTTPS.

- -

macOS and Windows include OpenSSH in their base install so this isn't needed.

- -

On Arch Linux:

- -

sudo pacman -S openssh

- -

On Debian and Ubuntu:

- -

sudo apt install openssh-client

- -

Obtaining factory images

- -

You need to obtain the GrapheneOS factory images for your device to proceed with - the installation process.

- -

You can either download the files with your browser or using a command like - curl. It's generally easier to use the command-line since you're already - using it for the rest of the installation process, so these instructions use - curl.

- -

Download the factory images - public key (allowed_signers) in order to verify the factory images:

- -

curl -O https://releases.grapheneos.org/allowed_signers

- -

This is the content of allowed_signers:

- -

contact@grapheneos.org ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIIUg/m5CoP83b0rfSCzYSVA4cw4ir49io5GPoxbgxdJE

- -

Other locations to obtain the signing key:

- -

When the current signing key is replaced, the new key will be signed with it.

- -

Download the factory images for the device from the releases - page. For example, to download the VERSION release for - a device with the codename DEVICE_NAME:

- -

curl -O https://releases.grapheneos.org/DEVICE_NAME-install-VERSION.zip
-curl -O https://releases.grapheneos.org/DEVICE_NAME-install-VERSION.zip.sig

- -

Next, verify the factory images using the signature.

- -

On Linux and macOS:

- -

ssh-keygen -Y verify -f allowed_signers -I contact@grapheneos.org -n "factory images" -s DEVICE_NAME-install-VERSION.zip.sig < DEVICE_NAME-install-VERSION.zip

- -

On Windows:

- -

cmd /c 'ssh-keygen -Y verify -f allowed_signers -I contact@grapheneos.org -n "factory images" -s DEVICE_NAME-install-VERSION.zip.sig < DEVICE_NAME-install-VERSION.zip'

- -

This will produce the following output when successful:

- -

Good "factory images" signature for contact@grapheneos.org with ED25519 key SHA256:AhgHif0mei+9aNyKLfMZBh2yptHdw/aN7Tlh/j2eFwM

- -

Flashing factory images

- -

The initial install will be performed by flashing the factory images. This will - replace the existing OS installation and wipe all the existing data.

- -

Next, extract the factory images.

- -

On Linux:

- -

bsdtar xvf DEVICE_NAME-install-VERSION.zip

- -

On macOS and Windows:

- -

tar xvf DEVICE_NAME-install-VERSION.zip

- -

Move into the directory:

- -

cd DEVICE_NAME-install-VERSION

- -

Flash the images with the flash-all script in the directory.

- -

On Linux and macOS:

- -

bash flash-all.sh

- -

On Windows:

- -

./flash-all.bat

- -

Wait for the flashing process to complete. It will automatically handle - flashing the firmware, rebooting into the bootloader interface and flashing the OS. - Avoid interacting with the device until the flashing script is finished. Then, - proceed to locking the bootloader before using - the device as locking wipes the data again.

- -

Troubleshooting

- -

The text output from a failed attempt at flashing will contain valuable - diagnostic information which is essential in knowing where and how the process - went wrong. Please provide this information when asking for help on the - GrapheneOS chat room.

- -

A common issue on Linux distributions is that they mount the default temporary file - directory /tmp as tmpfs which results in it being backed by memory and - swap rather than persistent storage. By default, the size is 50% of the available - virtual memory. This is often not enough for the flashing process, especially since - /tmp is shared between applications and users. To use a different - temporary directory if your /tmp doesn't have enough space available:

- -

mkdir tmp && TMPDIR="$PWD/tmp" ./flash-all.sh

- -

Locking the bootloader

- -

Locking the bootloader is important as it enables full verified boot. It also - prevents using fastboot to flash, format or erase partitions. Verified boot will - detect modifications to any of the OS partitions and it will prevent reading any - modified / corrupted data. If changes are detected, error correction data is used - to attempt to obtain the original data at which point it's verified again which - makes verified boot robust to non-malicious corruption.

- -

In the bootloader interface, set it to locked:

- -

fastboot flashing lock

- -

The command needs to be confirmed on the device and will wipe all data. Use one - of the volume buttons to switch the selection to accepting it and the power button - to confirm.

- -

Post-installation

- -

Booting

- -

You've now successfully installed GrapheneOS and can boot it. Pressing the - power button with the default Start option selected in the bootloader - interface will boot the OS.

- -

Disabling OEM unlocking

- -

During first setup, the final screen will contain a toggle regarding OEM - unlocking which is checked by default. This will disable OEM unlocking, which is - recommended.

- -

If you need to enable or disable OEM unlocking in the future, it can be done - in the developer settings menu within the operating system.

- -

Verifying installation

- -

The verified boot and attestation features provided by the supported - devices can be used to verify that the hardware, firmware and GrapheneOS - installation are genuine. Even if the computer you used to flash GrapheneOS - was compromised and an attacker replaced GrapheneOS with their own malicious - OS, it can be detected with these features.

- -

Verified boot verifies the entirety of the firmware and OS images on every - boot. The public key for the firmware images is burned into fuses in the SoC at - the factory. Firmware security updates also update the rollback index burned - into fuses to provide rollback protection.

- -

The final firmware boot stage before the OS is responsible for verifying - it. For the stock OS, it uses a hard-wired public key. Installing GrapheneOS - flashes the GrapheneOS verified boot public key to the secure element. Each - boot, this key is loaded and used to verify the OS. For both the stock OS and - GrapheneOS, a rollback index based on the security patch level is loaded from - the secure element to provide rollback protection.

- -

Verified boot key hash

- -

When loading an alternate OS, the device shows a yellow notice on boot - with the ID of the alternate OS based on the sha256 of the verified boot - public key. 4th and 5th generation Pixels only show the first 32 bits of - the hash so you can't use this approach. 6th generation Pixels onwards - show the full hash and you can compare it against the official GrapheneOS - verified boot key hashes below:

- -

Pixel 9a: 0508de44ee00bfb49ece32c418af1896391abde0f05b64f41bc9a2dfb589445b
Pixel 9 Pro Fold: af4d2c6e62be0fec54f0271b9776ff061dd8392d9f51cf6ab1551d346679e24c
Pixel 9 Pro XL: 55d3c2323db91bb91f20d38d015e85112d038f6b6b5738fe352c1a80dba57023
Pixel 9 Pro: f729cab861da1b83fdfab402fc9480758f2ae78ee0b61c1f2137dd1ab7076e86
Pixel 9: 9e6a8f3e0d761a780179f93acd5721ba1ab7c8c537c7761073c0a754b0e932de
Pixel 8a: 096b8bd6d44527a24ac1564b308839f67e78202185cbff9cfdcb10e63250bc5e
Pixel 8 Pro: 896db2d09d84e1d6bb747002b8a114950b946e5825772a9d48ba7eb01d118c1c
Pixel 8: cd7479653aa88208f9f03034810ef9b7b0af8a9d41e2000e458ac403a2acb233
Pixel Fold: ee0c9dfef6f55a878538b0dbf7e78e3bc3f1a13c8c44839b095fe26dd5fe2842
Pixel Tablet: 94df136e6c6aa08dc26580af46f36419b5f9baf46039db076f5295b91aaff230
Pixel 7a: 508d75dea10c5cbc3e7632260fc0b59f6055a8a49dd84e693b6d8899edbb01e4
Pixel 7 Pro: bc1c0dd95664604382bb888412026422742eb333071ea0b2d19036217d49182f
Pixel 7: 3efe5392be3ac38afb894d13de639e521675e62571a8a9b3ef9fc8c44fd17fa1
Pixel 6a: 08c860350a9600692d10c8512f7b8e80707757468e8fbfeea2a870c0a83d6031
Pixel 6 Pro: 439b76524d94c40652ce1bf0d8243773c634d2f99ba3160d8d02aa5e29ff925c
Pixel 6: f0a890375d1405e62ebfd87e8d3f475f948ef031bbf9ddd516d5f600a23677e8

- -

Checking this is useful after installation, but you don't need to check - it manually for verified boot to work. The verified boot public key - flashed to the secure element can only be changed when the device is - unlocked. Unlocking the device performs the same wiping of the secure - element as a factory reset and prevents data from being recovered even if - the SSD was cloned and your passphrase(s) are obtained because the - encryption keys can no longer be derived anymore. The verified boot key is - also one of the inputs for deriving the encryption keys in addition to the - user's lock method(s) and random token(s) on the secure element.

- -

Hardware-based attestation

- -

GrapheneOS provides our Auditor app for using a combination of the - verified boot and attestation features to verify that the hardware, - firmware and operating system are genuine along with providing other - useful data from the hardware and operating system.

- -

Since the purpose of Auditor is to obtain information about the device - without trusting it to be honest, results aren't shown on the device being - verified. You need a 2nd Android device running Auditor for local QR code - based verification. You can also use our optional device integrity - monitoring service for automatic scheduled verifications with support for - email alerts.

- -

See the Auditor tutorial - for a guide.

- -

Auditor is primarily based on a pairing model where it generates a - hardware backed signing key and hardware backed attestation signing key - and pins them as part of the initial verification. The first verification - is bootstrapped based on chaining trust to one of the Android attestation - roots. After the first verification, it provides a highly secure system - for obtaining information about the device going forward. An attacker - could bypass the initial verification with a leaked attestation key or by - proxying to another device with the device model, OS and patch level that - the user is expecting. Proxying to another device will be addressed in the - future with optional support for the hardware serial number attestation - feature.

- -

Further information

- -

Please look through the usage guide and - FAQ for more information. If you have further questions not - covered by the site, join the official GrapheneOS - chat channels and ask the questions in the appropriate channel.

- -

Replacing GrapheneOS with the stock OS

- -

Installation of the stock OS via the stock factory images is the same process - described above. However, before flashing and locking, there's an additional step - to fully revert the device to a clean factory state.

- -

The GrapheneOS factory images flash a non-stock Android Verified Boot key which - needs to be erased to fully revert back to a stock device state. Before flashing the - stock factory images, you should boot the device into fastboot mode and make sure the - bootloader is unlocked. Then erase the custom Android Verified Boot key to untrust it:

- -

fastboot erase avb_custom_key

Install

- -

GrapheneOS has two officially supported installation methods. You can either use - the WebUSB-based installer recommended for most users or - the command-line installation guide aimed at more technical - users.

- -

We strongly recommend using one of the official installation methods. Third party - installation guides tend to be out-of-date and often contain misguided advice and - errors.

- -

The command-line approach requires being on an OS with proper fastboot and OpenSSH - packages, along with understanding the process enough to avoid blindly trusting the - instructions from our site. The web-based installation approach avoids needing any - software beyond a browser with WebUSB support and you can still avoid trusting our - server infrastructure by checking the verified boot key hash.

Web installer

- -

This is the WebUSB-based installer for GrapheneOS and is the recommended approach - for most users. The command-line installation guide is the - more traditional approach to installing GrapheneOS.

- -

- - - -

Prerequisites

- -

You need a computer for running the web installer with at least 2GB of free - memory available and 32GB of free storage space. The web installer can be run on an - Android phone or tablet, unlike the command-line installation.

- -

Officially supported operating systems for the web install method:

- -

Windows 10
Windows 11
macOS Ventura (13)
macOS Sonoma (14)
macOS Sequoia (15)
Arch Linux
Debian 11 (bullseye)
Debian 12 (bookworm)
Ubuntu 20.04 LTS
Ubuntu 22.04 LTS
Ubuntu 24.04 LTS
Ubuntu 24.10
Linux Mint 20 (follow Ubuntu 20.04 LTS instructions)
Linux Mint 21 (follow Ubuntu 22.04 LTS instructions)
Linux Mint 22 (follow Ubuntu 24.04 LTS instructions)
Linux Mint Debian Edition 6 (follow Debian 12 instructions)
ChromeOS
GrapheneOS
Android 12 with Play Protect certification
Android 13 with Play Protect certification
Android 14 with Play Protect certification
Android 15 with Play Protect certification

- -

Make sure your operating system is up-to-date before proceeding.

- -

Officially supported browsers for the web install method:

- -

Chromium (outside Ubuntu, since they ship a broken Snap package without working WebUSB)
Vanadium (GrapheneOS)
Google Chrome
Microsoft Edge
Brave (with Brave Shields disabled, since it caps storage usage at a low value to avoid fingerprinting available storage)

- -

On Android, disable desktop mode for the browser since it currently prevents our - web installer from detecting Android and handling needing to request permission to - reconnect to the device after each reboot. Desktop mode is enabled by default on - large tablets with at least 8GB of RAM such as the Pixel Tablet.

- -

You should avoid Flatpak and Snap versions of browsers, as they're known to cause issues during the installation process.

- -

Make sure your browser is up-to-date before proceeding.

- -

Do not use Incognito or other private browsing modes. These modes usually - prevent the web installer from having enough storage space to extract the - downloaded release.

- -

Enabling OEM unlocking

- -

OEM unlocking needs to be enabled from within the operating system.

- -

Enable the developer options menu by going to Settings > About phone/tablet and repeatedly - pressing the Build number menu entry until developer mode is enabled.

- -

Flashing as non-root

- -

On traditional Linux distributions, USB devices cannot be used as non-root - without udev rules for each type of device. This is not an issue for other - platforms.

- -

On Arch Linux, install the android-udev package. On Debian and - Ubuntu, install the android-sdk-platform-tools-common package.

- -

Working around fwupd bugs on Linux distributions

- -

You can stop fwupd with the following command:

- -

sudo systemctl stop fwupd.service

- -

This doesn't disable the service and it will start again on reboot.

- -

Booting into the bootloader interface

- -

You need to boot your device into the bootloader interface. To do this, you need - to hold the volume down button while the device boots.

- -

The easiest approach is to reboot the device and begin holding the volume down - button until it boots up into the bootloader interface.

- -

Connecting the device

- -

Connect the device to the computer. On Linux, you'll need to do this again if - you didn't have the udev rules set up when you connected it.

- -

Unlocking the bootloader

- -

Unlock the bootloader to allow flashing the OS and firmware:

- - - -

The command needs to be confirmed on the device and will wipe all data. Use one - of the volume buttons to switch the selection to accepting it and the power button to - confirm.

- -

Obtaining factory images

- -

You need to obtain the GrapheneOS factory images for your device to proceed with - the installation process.

- -

Press the button below to start the download:

- - - - -

- -

Flashing factory images

- -

The initial install will be performed by flashing the factory images. This will - replace the existing OS installation and wipe all the existing data.

- - - - -

- - -

- -

Locking the bootloader

- -

In the bootloader interface, set it to locked:

- - - -

The command needs to be confirmed on the device and will wipe all data. Use one - of the volume buttons to switch the selection to accepting it and the power button - to confirm.

- -

Post-installation

- -

Booting

- -

You've now successfully installed GrapheneOS and can boot it. Pressing the - power button with the default Start option selected in the bootloader - interface will boot the OS.

- -

Disabling OEM unlocking

- -

During first setup, the final screen will contain a toggle regarding OEM - unlocking which is checked by default. This will disable OEM unlocking, which is - recommended.

- -

If you need to enable or disable OEM unlocking in the future, it can be done - in the developer settings menu within the operating system.

- -

Verifying installation

- -

Verified boot key hash

- -

Pixel 9a: 0508de44ee00bfb49ece32c418af1896391abde0f05b64f41bc9a2dfb589445b
Pixel 9 Pro Fold: af4d2c6e62be0fec54f0271b9776ff061dd8392d9f51cf6ab1551d346679e24c
Pixel 9 Pro XL: 55d3c2323db91bb91f20d38d015e85112d038f6b6b5738fe352c1a80dba57023
Pixel 9 Pro: f729cab861da1b83fdfab402fc9480758f2ae78ee0b61c1f2137dd1ab7076e86
Pixel 9: 9e6a8f3e0d761a780179f93acd5721ba1ab7c8c537c7761073c0a754b0e932de
Pixel 8a: 096b8bd6d44527a24ac1564b308839f67e78202185cbff9cfdcb10e63250bc5e
Pixel 8 Pro: 896db2d09d84e1d6bb747002b8a114950b946e5825772a9d48ba7eb01d118c1c
Pixel 8: cd7479653aa88208f9f03034810ef9b7b0af8a9d41e2000e458ac403a2acb233
Pixel Fold: ee0c9dfef6f55a878538b0dbf7e78e3bc3f1a13c8c44839b095fe26dd5fe2842
Pixel Tablet: 94df136e6c6aa08dc26580af46f36419b5f9baf46039db076f5295b91aaff230
Pixel 7a: 508d75dea10c5cbc3e7632260fc0b59f6055a8a49dd84e693b6d8899edbb01e4
Pixel 7 Pro: bc1c0dd95664604382bb888412026422742eb333071ea0b2d19036217d49182f
Pixel 7: 3efe5392be3ac38afb894d13de639e521675e62571a8a9b3ef9fc8c44fd17fa1
Pixel 6a: 08c860350a9600692d10c8512f7b8e80707757468e8fbfeea2a870c0a83d6031
Pixel 6 Pro: 439b76524d94c40652ce1bf0d8243773c634d2f99ba3160d8d02aa5e29ff925c
Pixel 6: f0a890375d1405e62ebfd87e8d3f475f948ef031bbf9ddd516d5f600a23677e8

- -

Hardware-based attestation

- -

See the Auditor tutorial - for a guide.

- -

Further information

- -

Replacing GrapheneOS with the stock OS

- -

Installation of the stock OS via the stock factory images is similar to the - process described above but with - Google's web flashing - tool. However, before flashing and locking, there's an additional step to - fully revert the device to a clean factory state.

- -

- - - -